bet007足球比分

<i id="bljjb"></i>
<noframes id="bljjb">
<address id="bljjb"></address><span id="bljjb"></span>

<noframes id="bljjb">

    <address id="bljjb"></address><address id="bljjb"><address id="bljjb"><listing id="bljjb"></listing></address></address>

        <address id="bljjb"><listing id="bljjb"></listing></address>
        <address id="bljjb"></address>
        <noframes id="bljjb">
        <address id="bljjb"></address>

        makeininida_rapidcoat
        Domestic
        +91-9654292962
        International
        +91-9654292970

        HAPA

        HAPA
        ?????

        High Adhesion Polymer Alloy (HAPA) plastic coating powders have been specifically designed to provide a long lasting, chemically & mechanically tough coating for both exterior and interior applications. HAPA coatings are a superior choice when compared to the conventionally used PVC and Polyester Coatings. The Coating has excellent adhesion to the base metal and is almost impossible to peel off. We have following grades on the basis of applications -?

        Steps

        Dip Coating

        Spray Coating

        Flame Spray Coating

        Spray Lining

        Roto Lining

        Pre-Treatment

        Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

        Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

        Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

        Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

        Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc.

        Pre-Heating

        300°C

        300°C

        -

        300°C

        300°C

        Coating

        Hot substrate dipped in the fluidized tank full of powder where the powder is fluidizing when the pressurized air blown from bottom to top. The substrate will completely dip in the powder.

        Electrostatically charged powder blown on the hot substrate from your regular spray coating gun.

        HAPA powder blown inside the flame to the substrate. The powder melts in transit and forms a solid coating as the substrate cools down.

        Fix the nozzle of the gun on the top of the rotating fire extinguisher and spray the powder inside the extinguisher.

        Fill the powder inside the bottle or cylinder and then the cylinder will spin and tumble so that the cylinder can be coated uniformly. The left out powder removed out of the cylinder.

        Post Heating

        The article will again move to the oven to heat at 230°C for 2-3 minutes.

        The article will again move to the oven to heat at 230°C for 2-3 minutes.

        The article will again move to the oven to heat at 230°C for 2-3 minutes.

        The article will again move to the oven to heat at 230°C for 2-3 minutes.

        The article will again move to the oven to heat at 230°C for 2-3 minutes.

        Applications

        Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

        Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes

        Wire Mesh Fence, Valve, Springs, Cable Tie, Battery Boxes, Water Proofing of Swimming Pool

        Fire Extinguisher, Cylinder

        Fire Extinguisher, Cylinder

        ?

        ?

        ?

        ?

        ?

        ?

        ?

        ?

        ?

        <i id="bljjb"></i>
        <noframes id="bljjb">
        <address id="bljjb"></address><span id="bljjb"></span>

        <noframes id="bljjb">

          <address id="bljjb"></address><address id="bljjb"><address id="bljjb"><listing id="bljjb"></listing></address></address>

              <address id="bljjb"><listing id="bljjb"></listing></address>
              <address id="bljjb"></address>
              <noframes id="bljjb">
              <address id="bljjb"></address>

              video

              car

              image

              Variety show

              Real estate

              Second-hand housing

              reading

              news

              Mobile Games